Sliding quick-release plate for
balancing the camera supplied with 1/4-20" and 3/8" camera screws plus VHS
locating pin.
The round black knob on the side
of the head is used to adjust the tilt friction; the tilt-locking lever is on the opposite
side.
The notched black wheel below the
quick-release plate mechanism is the pan friction control; the pan-locking lever is just
below it near the bubble level.
|
516
PRO CINE-VIDEO HEAD / Cat. No: 516
Specifically designed for the
latest DV camcorders, the 516 Pro Cine/Video Head is compact, light, and can support
cameras up to 22 lbs.
The 516 is a cost effective high performance cine/video head equipped with fluid
cartridges that provides continuous adjustable drag control. This system gives quite a
wide range of friction control down to "zero drag" and operates on both pan and
tilt axis.
Other features include separate pan and
tilt locking mechanism, a fixed counter balance spring of 16.5 lbs load capacity at a
center of gravity of 5", two telescopic pan handles, and a bubble level.
The 516 can be mounted on a flat base tripod with a 3/8" female thread attachment, or
by attaching the 3141BALL to the head base, allowing it to fit a 100mm bowl.
|
|
SPECIFICATIONS
|
|
Cine-Video
|
|
Yes
|
|
Maximum Load Capacity
|
|
22 Ibs 9.979 kg
|
|
Head Height
|
|
4.9 inches 124.46
mm
|
|
Pan
|
|
360°
|
|
Pan Drag
|
|
continuously adjustable
|
|
Independent Pan Lock
|
|
Yes
|
|
Pan Handle
|
|
2- Telescopic
|
|
Tilt
|
|
+90° -60°
|
|
Tilt Drag
|
|
continuously adjustable
|
|
Independent Tilt Lock
|
|
Yes
|
|
QR Plate Supplied
|
|
3272
|
|
Leveling Bubble
|
|
Yes
|
|
Weight
|
|
4.4 lbs 1.9958 kg
|
|
